Ottawa, Canada, September 14, 2015 — Tallysman, a leading manufacturer of economical high performance GNSS antennas, is pleased to announce the commercial availability of the outstanding VeraPhase™ 6000 antenna Series. This family of antennas provides the lowest axial ratios (horizon to horizon, through all azimuths) across all GNSS frequencies (<0.5dB at zenith, <2 dB at horizon), great front to back ratios at all elevations, high efficiency (>70%), a tight PCV (± 1mm through all frequencies, azimuths, and elevations), and a consistent PCO through all frequencies.
The performance of the VeraPhase™ rivals that of choke ring antennas but is much lighter, smaller, and more economical. All these features makes this antenna family ideal for use in survey, precision RTK, and Reference antenna applications.
This antenna also provides an available PCB within the base of the antenna for integration of a custom system board such as a dual band or RTK GNSS receivers or other applications.
The VP6000 family provides high receive RHCP gain over the full GNSS spectrum: Low GNSS band (1164MHz to 1300MHz), L-band correction services (1525MHz to 1559MHz), and High GNSS band (1559MHz to 1610 MHz). Each model features a robust, high IP3, pre-filtered LNA to minimize de-sensing from high-level out-of-band signals, including 700MHz LTE, and that yet still provides a noise figure of less than 2.5dB. Non-pre-filtered versions are also available with a noise figure of less than 1.5dB.
The VP6000 antenna family is presently available in three formats:
Each antenna has a well defined Phase Centre Offset relative to the Antenna Reference Plane.
The base housing of the VP6000 is IP67 compliant and weighs less than 700 g. The antenna is 167 mm wide at the top, 110mm wide at the base and 110 mm in height. Each model has a 5/8” x 11 TPI thread for mounting and is available with either a TNC or an N-Type connector.
A White Paper is available on Tallysman’s website at: http://www.tallysman.com/wp-content/uploads/Tallysman-Veraphase-6000-White-Paper-.pdf
About Tallysman
Tallysman is a leading manufacturer of high performance, high quality products for a wide range of Global Navigation Satellite Systems (GNSS) applications. Tallysman’s mission is to provide GNSS antennas which meet the needs of a new generation of positioning systems providing unprecedented accuracy at ever decreasing prices. (www.tallysman.com)
Tallysman manufactures its products and is headquartered in Ottawa, Canada
For more information, please contact [email protected] Tel. 613-591-3131 ext 101